Copper Bus Bar EVE 105 Ah

COPPER BUSBAR EVE 105 AH

The COPPER BUSBAR EVE 105 AH is a copper battery busbar designed for rigid electrical interconnection in prismatic lithium battery packs. Copper provides high electrical conductivity and is widely used for compact, low-loss battery interconnections. The product is supplied in a battery-interconnect format intended for compact module assembly. It is positioned specifically for EVE LF105 105Ah prismatic-cell battery packs. The product is suitable for EV, ESS, inverter, solar-storage and industrial battery-pack assembly.

A battery busbar replaces long flexible cable runs between adjacent cell terminals with a short, rigid conductor. This helps battery builders create a compact series or parallel current path while keeping the module layout neat and serviceable. The COPPER BUS BAR EVE 105 AH is positioned as a lithium battery busbar / prismatic cell interconnect, with its product-specific battery interconnect format and eve 105ah prismatic-cell busbar making it easy to identify for production, replacement and custom pack-building requirements.

Copper provides high electrical conductivity and is widely used for compact, low-loss battery interconnections. In prismatic battery modules, a properly designed busbar also simplifies pack assembly because the electrical path, terminal spacing and mechanical fastening are handled in a compact component rather than separate cables and lugs.

The busbar's electrical role is to transfer charge and discharge current between battery connection points with minimal unnecessary conductor length. Copper is a proven busbar material for lithium battery systems, and the rigid profile helps maintain a stable cell-to-cell connection inside the module. The product is supplied in a battery-interconnect format intended for compact module assembly. It is positioned specifically for EVE LF105 105Ah prismatic-cell battery packs.

For flat busbar variants, the stated width and thickness create a broad conductor section that also provides useful mechanical stiffness. A 3 mm profile offers greater conductor section and rigidity than a 2 mm profile of the same width, while compact 2 mm links are common where lower weight and tighter packaging are priorities. Stud and clinch variants streamline fastening by integrating the terminal hardware into the interconnect format.

The Copper BusBar EVE 105 AH is designed for EVE LF105 / 105Ah-class prismatic LiFePO4 battery packs and is used as a rigid connection between adjacent cell terminals. It supports common series and parallel module building for EV, inverter, solar and stationary energy-storage systems. The cell-specific naming also makes it useful as a replacement or production busbar where the battery design is based around EVE 105Ah prismatic cells.

Applications

• EVE LF105 105Ah LiFePO4 prismatic-cell battery packs.

• EV battery modules using 105Ah-class prismatic cells and rigid cell-to-cell links.

• Solar and stationary energy-storage systems built around EVE 105Ah cells.

• Inverter and backup battery banks assembled from EVE prismatic cells.

• Battery manufacturing, module prototyping and service work for EVE 105Ah pack platforms.

Installation Guide

Position the component squarely on clean battery terminals or enclosure hardware and keep polarity clearly identified throughout assembly. Use the battery-cell or enclosure manufacturer's specified fastener stack and tightening torque so the connection remains mechanically stable without stressing the terminal. Keep conductive tools insulated around energized cells and prevent loose hardware from falling across adjacent terminals.

After assembly, inspect the connection for full seating, alignment and secure fastening. For busbars and terminals, a clean contact surface and firm mechanical joint support efficient current transfer. For enclosure fasteners, ensure the mounted hardware sits flush and does not interfere with insulation, wiring or nearby cells. A final visual inspection and controlled pack test help maintain consistent production quality.

For volume production, standardize the busbar or fastener part number in the battery BOM so the same geometry and hardware are used across every pack. This improves repeatability during assembly, service and future replacement work.

Why Choose ARB Accessories?

ARB Accessories supplies battery-pack interconnects, busbars, terminals, fasteners and related lithium battery hardware for Indian pack assemblers, OEMs, EV builders, solar and ESS manufacturers, service teams and custom battery projects. The COPPERBUS BAR EVE 105 AH gives buyers a ready-to-source component for battery-module production while allowing related BMS, cells, wires, terminals, connectors, insulation and enclosure hardware to be purchased from the same specialist supplier. This makes it practical for both prototype quantities and repeat battery-pack manufacturing requirements.