35:I[13016,["/_next/static/immutable/chunks/2corl6wyj4669.js","/_next/static/immutable/chunks/38ah15c1p7ap-.js","/_next/static/immutable/chunks/3xn5j70p33j5y.js","/_next/static/immutable/chunks/0dvlxnnqxuduy.js","/_next/static/immutable/chunks/2eg-yrnfryrot.js","/_next/static/immutable/chunks/1j_n8vwjqsa3r.js","/_next/static/immutable/chunks/2sxd6b0k1yjf9.js","/_next/static/immutable/chunks/2k84_nzj--rvo.js","/_next/static/immutable/chunks/38o6oet1hvjre.js","/_next/static/immutable/chunks/2i_cz0mfxgrj1.js","/_next/static/immutable/chunks/265wzjyzqeedm.js","/_next/static/immutable/chunks/05v1mh10vi1qw.js","/_next/static/immutable/chunks/2p8kp63_lilkt.js","/_next/static/immutable/chunks/41aim9a-bg3dm.js","/_next/static/immutable/chunks/07gas4z4l3yo3.js","/_next/static/immutable/chunks/1-m7cvwwpimq3.js"],"CategoryPageShell"] 36:T6f1,

The PS11 IoT Device is a compact, plug-and-play GPS and telematics solution designed specifically for electric vehicle (EV) battery management using Daly BMS systems. It is intended to capture, transmit, and monitor key performance data from the battery pack, allowing for real-time visibility, enhanced safety, and remote diagnostics.

Key Features

Plug & Play Daly BMS Connector: Comes with a dedicated port to interface directly with Daly’s BMS (Battery Management System) without requiring manual configuration or custom wiring.

Real-Time Data Transmission: Sends live battery data such as voltage, current, temperature, and SOC (State of Charge) to cloud platforms or tracking systems.

Compact Design: Sleek and space-efficient housing allows for easy installation in limited space environments within EVs or battery enclosures.

Multi-wire Harness: Includes an extra wiring harness to facilitate power input and auxiliary data connections (IGN, ACC, GND, etc.).

IOT Enabled: Equipped with cellular or wireless communication module for seamless IoT connectivity.

Use Case Compatibility: Ideal for applications like:

Electric vehicles (2W/3W/4W)

E-rickshaws

Energy storage systems (ESS)

Fleet battery health monitoring

Typical Parameters (May vary by variant)

Parameter Specification

Communication Port UART (Dedicated to Daly)

Network GSM/GPRS/4G (varies)

Power Input 9V - 90V DC

Dimensions Compact (approx. 70x30x15mm)

Operating Temp -20°C to 60°C

Benefits

Battery Health Monitoring

Remote Diagnostics & Alerts

Improved Fleet Efficiency

Simplified Installation

37:Tcfa,

The 24S 5A Balancer Connect Board is a high-quality interface module designed to connect a 24S 5A Active Balancer to 24-series lithium battery packs. It provides secure and organized wiring between battery cells and the active balancing system, ensuring accurate cell voltage detection and efficient energy transfer during the balancing process.

Compatible with LiFePO₄ (LFP) and Lithium-Ion (NMC) battery chemistries, this connection board simplifies battery pack assembly and enhances the performance of active balancing systems used in Electric Vehicles (EVs), Battery Energy Storage Systems (BESS), solar ESS, UPS systems, and industrial lithium battery applications.

Key Features

Designed for 24S (24-Series) lithium battery packs
Compatible with 5A Active Balancer modules
Supports LiFePO₄ (LFP) and Lithium-Ion (NMC) battery chemistries
Provides a secure and reliable cell connection interface
Ensures accurate cell voltage signal transmission
Supports efficient active cell balancing
High-quality industrial-grade PCB construction
Simplifies battery pack wiring and installation
Compact design for easy integration into battery systems
Suitable for OEM battery manufacturing and custom battery pack assembly

Applications

Lithium Battery Packs

Provides a reliable connection interface for 24S LiFePO₄ and Lithium-Ion battery packs.

Electric Vehicles (EVs)

Suitable for electric motorcycles, scooters, utility vehicles, golf carts, and custom EV battery systems.

Battery Energy Storage Systems (BESS)

Ideal for solar energy storage systems, residential ESS, commercial battery banks, and off-grid power systems.

UPS & Backup Power Systems

Used in UPS battery banks, inverter systems, and emergency backup power installations.

Industrial Battery Manufacturing

Perfect for OEM battery pack production, battery module assembly, and custom lithium battery integration.

Telecom & Industrial Power Systems

Suitable for telecom backup batteries, industrial battery cabinets, and DC power distribution systems.

The 24S 5A Balancer Connect Board is a connection interface module for 24S 5A Active Balancing Systems, providing secure battery cell connections and accurate voltage signal transmission for LiFePO₄ and Lithium-Ion battery packs. It improves balancing efficiency, simplifies battery pack assembly, and enhances the safety and reliability of EV, Battery Energy Storage Systems (BESS), UPS, telecom, and industrial lithium battery applications.

38:Teb0,

The Bluetooth Module for JBD Smart BMS is a wireless communication accessory designed to enable Bluetooth connectivity between JBD (Jiabaida) Smart Battery Management Systems (BMS) and a compatible smartphone or tablet. When paired with the JBD/Xiaoxiang BMS mobile application, it allows users to monitor battery performance in real time without the need for wired communication.

Compatible with LiFePO₄ (LFP) and Lithium-Ion (NMC) battery systems, the Bluetooth module provides convenient access to essential battery information such as State of Charge (SOC), battery voltage, current, individual cell voltages, temperatures, charging/discharging status, and fault alarms. It is ideal for Electric Vehicles (EVs), Battery Energy Storage Systems (BESS), solar energy storage, UPS systems, marine batteries, and industrial lithium battery applications.

Key Features

Designed for JBD (Jiabaida) Smart BMS
Enables wireless Bluetooth communication
Compatible with the JBD/Xiaoxiang BMS mobile application
Real-time monitoring of:
- State of Charge (SOC)
- Battery pack voltage
- Charge/discharge current
- Individual cell voltages
- Battery temperature
- Charging/discharging status
- Battery fault and alarm information
Fast and stable Bluetooth connectivity
Compact plug-and-play design for easy installation
Low power consumption for continuous operation
Compatible with LiFePO₄ (LFP) and Lithium-Ion (NMC) battery systems

Applications

Lithium Battery Packs

Provides wireless monitoring for LiFePO₄ and Lithium-Ion battery packs.

Electric Vehicles (EVs)

Ideal for electric scooters, motorcycles, e-rickshaws, golf carts, utility vehicles, and custom EV battery packs.

Battery Energy Storage Systems (BESS)

Suitable for solar energy storage systems, residential ESS, commercial battery banks, and off-grid power systems.

UPS & Backup Power Systems

Allows convenient battery monitoring for UPS units, inverter battery systems, and backup power installations.

Marine & RV Applications

Perfect for boats, yachts, camper vans, and recreational vehicle (RV) battery systems.

Industrial Battery Systems

Used in telecom power systems, industrial battery cabinets, OEM battery packs, and custom lithium battery solutions.

The Bluetooth Module for JBD Smart BMS is a wireless communication accessory that connects compatible JBD Smart BMS units to a smartphone or tablet via Bluetooth. It enables real-time monitoring of State of Charge (SOC), battery voltage, current, individual cell voltages, temperature, charging/discharging status, and battery alarms, providing a convenient and efficient solution for managing lithium battery systems in Electric Vehicles (EVs), Battery Energy Storage Systems (BESS), UPS installations, marine battery systems, and industrial applications.

39:Td9f,

The K-Type NTC Temperature Sensor for DALY BMS is a high-precision temperature sensing probe designed for use with DALY Smart Battery Management Systems (BMS). It continuously monitors the temperature of lithium battery cells, battery packs, and power components, enabling the BMS to provide accurate temperature protection and optimize battery performance.

Using NTC (Negative Temperature Coefficient) thermistor technology, the sensor delivers fast and reliable temperature measurements, helping prevent overheating, over-temperature charging, and over-temperature discharging. It is suitable for LiFePO₄ (LFP), Lithium-Ion (NMC), and LTO battery systems used in electric vehicles (EVs), Battery Energy Storage Systems (BESS), UPS systems, solar energy storage, telecom power systems, and industrial battery applications.

Key Features

Compatible with DALY Smart BMS
High-precision NTC temperature sensing technology
Fast and accurate battery temperature monitoring
Supports over-temperature and under-temperature protection
Durable insulated cable for reliable long-term operation
Compact probe for easy installation on battery cells or battery packs
Stable and reliable temperature signal transmission
Plug-and-play connection with compatible DALY BMS models
Suitable for LiFePO₄ (LFP), Lithium-Ion (NMC), and LTO battery packs
Industrial-grade construction for demanding environments

Applications

Lithium Battery Packs

Monitors the temperature of LiFePO₄, Lithium-Ion, and LTO battery packs for safe operation.

Electric Vehicles (EVs)

Ideal for electric scooters, motorcycles, e-rickshaws, golf carts, electric cars, and utility vehicles.

Battery Energy Storage Systems (BESS)

Suitable for solar energy storage systems, residential ESS, commercial battery banks, and off-grid power systems.

UPS & Backup Power Systems

Provides temperature monitoring for UPS batteries, inverter battery banks, and emergency backup power systems.

Telecom & Industrial Power Systems

Used in telecom battery cabinets, industrial DC power systems, and OEM battery packs.

Battery Manufacturing & Maintenance

Perfect for battery pack assembly, testing, servicing, and preventive maintenance.

The K-Type NTC Temperature Sensor for DALY BMS is a high-accuracy battery temperature monitoring probe that works with DALY Smart BMS to continuously measure battery temperature and support automatic over-temperature protection. It improves the safety, reliability, and service life of lithium battery systems used in EVs, Battery Energy Storage Systems (BESS), UPS installations, solar energy storage, and industrial power applications.

3a:T6c3,

The DALY BMS Key Switch (K-Type) is designed to work with DALY BMS units that support external switch control via the K-type communication port. It provides manual switching functionality without disrupting the system wiring or firmware. Simply toggle the switch to activate or deactivate the power output from your BMS.

Perfect for use in battery-powered projects where safety, manual override, or power conservation is essential.

Key Features

Designed for DALY BMS (K-Type)

Compatible with DALY Smart BMS models that feature the K-type communication interface and external switch control support.

Manual ON/OFF Switching

Simple red toggle switch lets you easily control BMS output without connecting to software or apps.

Ready-to-Use Wiring

Comes prewired with input/output cables for direct connection to the BMS communication port and battery terminals.

Compact and Durable

Lightweight and rugged design ensures stable performance in mobile and fixed battery applications.

Safety-Enhancing Accessory

Enables fast shutdown during battery maintenance or emergency conditions — adding a crucial safety layer.

Applications

E-bikes, scooters, and EV battery packs
Solar battery banks with manual control requirement
Energy storage or inverter systems
DIY battery projects and portable power kits
Emergency shutdown / safety switches for lithium batteries

3b:Tee9,

The K-Type Bluetooth Module for DALY Smart BMS is a wireless communication accessory designed for DALY K-Type Smart Battery Management Systems (BMS). It enables seamless Bluetooth connectivity between the BMS and a compatible smartphone or tablet, allowing users to monitor battery performance in real time through the DALY Smart BMS mobile application.

Compatible with LiFePO₄ (LFP), Lithium-Ion (NMC), and LTO battery systems, the Bluetooth module provides instant access to important battery information, including State of Charge (SOC), battery voltage, current, individual cell voltages, temperatures, charging/discharging status, and fault alarms. It is an ideal accessory for electric vehicles (EVs), Battery Energy Storage Systems (BESS), solar energy storage, UPS systems, marine batteries, telecom power systems, and industrial lithium battery applications.

Key Features

Designed for DALY K-Type Smart BMS
Enables wireless Bluetooth communication
Compatible with the DALY Smart BMS mobile application
Real-time monitoring of:
- State of Charge (SOC)
- Battery pack voltage
- Charge/discharge current
- Individual cell voltages
- Battery temperature
- Charging and discharging status
- Battery fault and alarm information
Fast and stable Bluetooth connectivity
Plug-and-play installation with compatible DALY K-Type BMS
Low power consumption for continuous operation
Compact and durable industrial-grade design
Compatible with LiFePO₄ (LFP), Lithium-Ion (NMC), and LTO battery systems

Applications

Lithium Battery Packs

Provides wireless monitoring for LiFePO₄, Lithium-Ion, and LTO battery packs.

Electric Vehicles (EVs)

Ideal for electric scooters, motorcycles, e-rickshaws, golf carts, electric cars, and utility vehicles.

Battery Energy Storage Systems (BESS)

Suitable for solar energy storage systems, residential ESS, commercial battery banks, and off-grid power systems.

UPS & Backup Power Systems

Enables convenient battery monitoring for UPS units, inverter battery systems, and backup power installations.

Marine & RV Applications

Perfect for boats, yachts, camper vans, and recreational vehicle battery systems.

Industrial Battery Systems

Used in telecom power systems, industrial battery cabinets, OEM battery packs, and custom lithium battery solutions.

The K-Type Bluetooth Module for DALY Smart BMS is a wireless communication accessory that connects compatible DALY K-Type Smart BMS units to a smartphone or tablet via Bluetooth. It enables real-time monitoring of SOC, voltage, current, individual cell voltages, temperature, and battery alarms, providing a convenient and efficient solution for managing lithium battery systems in EVs, Battery Energy Storage Systems (BESS), UPS installations, and industrial applications.

3c:Tfba,

The USB to UART Converter for DALY BMS K-Type is a professional communication and programming interface designed to connect DALY K-Type Smart Battery Management Systems (BMS) to a Windows PC or laptop through a USB port. It enables reliable UART communication for real-time battery monitoring, BMS parameter configuration, diagnostics, firmware upgrades (where supported), and data analysis using compatible DALY BMS software.

Designed for LiFePO₄ (LFP), Lithium-Ion (NMC), and LTO battery systems, this converter provides stable, high-speed communication between the BMS and computer, making it an essential tool for battery manufacturers, EV service centers, energy storage system integrators, and industrial battery maintenance professionals.

Key Features

Designed for DALY K-Type Smart BMS
Converts USB to UART communication
Enables BMS programming, monitoring, and diagnostics
Compatible with DALY PC configuration and monitoring software
Supports real-time monitoring of:
- State of Charge (SOC)
- Battery pack voltage
- Charge/discharge current
- Individual cell voltages
- Battery temperature
- MOSFET status
- Battery health and fault alarms
Supports BMS parameter configuration
Supports firmware updates on compatible DALY BMS models
High-speed and stable UART data communication
Plug-and-play USB interface for quick and easy connection
Compact, durable, and industrial-grade construction
Compatible with LiFePO₄ (LFP), Lithium-Ion (NMC), and LTO battery systems

Applications

Lithium Battery Packs

Used for monitoring, programming, configuring, and diagnosing LiFePO₄, Lithium-Ion, and LTO battery packs.

Electric Vehicles (EVs)

Ideal for electric scooters, motorcycles, e-rickshaws, golf carts, electric cars, and commercial EV battery systems.

Battery Energy Storage Systems (BESS)

Suitable for solar energy storage systems, residential ESS, commercial battery banks, and off-grid power installations.

UPS & Backup Power Systems

Provides communication and configuration for UPS batteries, inverter battery systems, and emergency backup power solutions.

Battery Manufacturing & Service Centers

Perfect for OEM battery pack production, quality control, testing, maintenance, troubleshooting, and after-sales service.

Industrial & Telecom Power Systems

Used in telecom battery cabinets, industrial DC power systems, energy management systems, and custom lithium battery solutions.

The USB to UART Converter for DALY BMS K-Type is a professional programming and communication tool that connects DALY K-Type Smart BMS to a computer for real-time battery monitoring, parameter configuration, diagnostics, firmware updates (where supported), and system management. It is an essential accessory for efficiently managing lithium battery systems in EVs, Battery Energy Storage Systems (BESS), UPS installations, telecom power systems, battery manufacturing, and industrial applications.

3d:Tdee,

The DALY 16S 5A Parallel Pack Module is an intelligent battery pack expansion module designed for use with compatible DALY Smart BMS systems. It enables the safe parallel connection of multiple 16S lithium battery packs, while supporting battery pack communication, coordinated operation, and controlled equalization current during parallel connection. This helps improve the safety, stability, and scalability of high-capacity lithium battery systems.

Designed for 16S LiFePO₄ (LFP) and 16S Lithium-Ion (NMC) battery packs, the module is ideal for Battery Energy Storage Systems (BESS), solar ESS, UPS systems, telecom backup batteries, marine applications, off-grid power systems, and industrial energy storage installations.

Key Features

Designed for 16S lithium battery packs
Compatible with DALY Smart BMS (supported models)
Supports safe parallel connection of multiple battery packs
5A controlled equalization current during parallel connection
Helps minimize voltage differences between battery packs before parallel operation
Supports battery pack communication and coordinated management
Improves battery bank expansion and system scalability
Plug-and-play installation with compatible DALY BMS
Compact and durable industrial-grade design
Compatible with LiFePO₄ (LFP) and Lithium-Ion (NMC) battery systems
Reliable performance for continuous operation in demanding environments

Applications

Parallel Lithium Battery Packs

Safely connects multiple 16S LiFePO₄ or Lithium-Ion battery packs to increase total system capacity.

Battery Energy Storage Systems (BESS)

Ideal for residential, commercial, and industrial solar energy storage systems.

Hybrid Solar Inverters

Supports expanded battery banks for hybrid inverter and off-grid solar installations.

UPS & Backup Power Systems

Suitable for UPS battery banks, inverter systems, and emergency backup power solutions.

Telecom & Industrial Power Systems

Used in telecom backup batteries, industrial battery cabinets, and DC power systems.

Marine & Mobile Energy Systems

Perfect for marine battery banks, RVs, camper vans, and mobile power systems.

The DALY 16S 5A Parallel Pack Module is a parallel communication and active balancing accessory for compatible DALY Smart BMS systems. It enables the safe parallel operation of multiple 16S lithium battery packs, supports controlled 5A equalization current, and improves the reliability, safety, and scalability of EV, Battery Energy Storage Systems (BESS), UPS, solar, telecom, and industrial lithium battery applications.

3e:Teaf,

The DALY 16S 15A Parallel Pack Module is an intelligent battery pack expansion module designed for use with compatible DALY Smart BMS systems. It enables the safe parallel connection of multiple 16S lithium battery packs, supporting battery pack communication, synchronized operation, and controlled equalization current during parallel connection. With a 15A equalization capability, the module helps reduce voltage differences between battery packs before they are connected in parallel, improving overall system safety and reliability.

Designed for 16S LiFePO₄ (LFP) and 16S Lithium-Ion (NMC) battery packs, this module is ideal for Battery Energy Storage Systems (BESS), solar ESS, UPS systems, telecom backup batteries, off-grid power systems, marine battery banks, and industrial energy storage applications.

Key Features

Designed for 16S lithium battery packs
Compatible with DALY Smart BMS (supported models)
Supports the safe parallel connection of multiple battery packs
15A controlled equalization current for faster voltage equalization
Helps reduce voltage differences before parallel operation
Supports battery pack communication and synchronized management
Improves battery bank scalability and overall system capacity
Plug-and-play installation with compatible DALY BMS
Compact, durable, and industrial-grade construction
Compatible with LiFePO₄ (LFP) and Lithium-Ion (NMC) battery systems
Designed for reliable long-term operation in demanding environments

Applications

Parallel Lithium Battery Packs

Safely connects multiple 16S LiFePO₄ or Lithium-Ion battery packs to increase energy storage capacity.

Battery Energy Storage Systems (BESS)

Ideal for residential, commercial, and industrial solar energy storage systems.

Hybrid Solar Inverters

Supports expanded battery banks for hybrid inverter, off-grid, and backup power systems.

UPS & Backup Power Systems

Suitable for UPS battery banks, inverter systems, and emergency backup power installations.

Telecom & Industrial Power Systems

Used in telecom backup batteries, industrial battery cabinets, and DC power systems.

Marine & Mobile Energy Systems

Perfect for marine battery banks, RVs, camper vans, and mobile lithium battery systems.

The DALY 16S 15A Parallel Pack Module is a parallel communication and battery equalization module for compatible DALY Smart BMS systems. It enables the safe parallel operation of multiple 16S lithium battery packs, provides 15A controlled equalization current for faster pack voltage balancing, and enhances the safety, stability, and scalability of Battery Energy Storage Systems (BESS), solar installations, UPS systems, EVs, telecom power systems, and industrial lithium battery applications.

3f:Teec,

The DALY 24S 5A Parallel Pack Module is an intelligent battery pack expansion and parallel communication module designed for use with compatible DALY Smart BMS systems. It enables the safe parallel connection of multiple 24S lithium battery packs, while supporting battery pack communication, synchronized operation, and controlled equalization current during parallel connection. The integrated 5A equalization function helps reduce voltage differences between battery packs before they are connected, minimizing inrush current and improving overall system safety.

Designed for 24S LiFePO₄ (LFP) and 24S Lithium-Ion (NMC) battery packs, this module is ideal for Battery Energy Storage Systems (BESS), commercial ESS, solar energy storage, UPS systems, telecom backup batteries, off-grid power systems, marine battery banks, and industrial lithium battery applications.

Key Features

Designed for 24S lithium battery packs
Compatible with DALY Smart BMS (supported models)
Supports the safe parallel connection of multiple battery packs
5A controlled equalization current for safe voltage balancing
Helps reduce voltage differences before parallel operation
Supports battery pack communication and synchronized management
Minimizes surge current during battery pack connection
Improves battery bank expansion and overall system scalability
Plug-and-play installation with compatible DALY BMS
Compact and durable industrial-grade construction
Compatible with LiFePO₄ (LFP) and Lithium-Ion (NMC) battery systems
Suitable for continuous operation in demanding energy storage applications

Applications

Parallel Lithium Battery Packs

Safely connects multiple 24S LiFePO₄ or Lithium-Ion battery packs to increase overall battery capacity.

Battery Energy Storage Systems (BESS)

Ideal for residential, commercial, and industrial solar energy storage systems.

Hybrid Solar Inverters

Supports expanded battery banks for hybrid inverter, off-grid, and renewable energy installations.

UPS & Backup Power Systems

Suitable for UPS battery banks, inverter systems, and emergency backup power applications.

Telecom & Industrial Power Systems

Used in telecom backup batteries, industrial battery cabinets, and DC power distribution systems.

Marine & Mobile Energy Systems

Perfect for marine battery banks, RVs, camper vans, mobile power systems, and custom lithium battery installations.

The DALY 24S 5A Parallel Pack Module is a parallel communication and battery equalization module for compatible DALY Smart BMS systems. It enables the safe parallel operation of multiple 24S lithium battery packs, provides 5A controlled equalization current to balance pack voltages before connection, and improves the safety, reliability, and scalability of Battery Energy Storage Systems (BESS), solar energy storage, UPS systems, telecom power systems, EV battery banks, and industrial lithium battery applications.

40:Tf15,

The DALY 24S 15A Parallel Pack Module is an advanced battery pack expansion and parallel communication module designed for use with compatible DALY Smart Battery Management Systems (BMS). It enables the safe parallel connection of multiple 24S lithium battery packs, while supporting battery pack communication, synchronized operation, and controlled voltage equalization before parallel operation. With a 15A active equalization capability, the module helps rapidly reduce voltage differences between battery packs, minimizing inrush current and improving overall system safety and reliability.

Designed for 24S LiFePO₄ (LFP) and 24S Lithium-Ion (NMC) battery packs, this module is ideal for Battery Energy Storage Systems (BESS), commercial and industrial ESS, solar energy storage, UPS systems, telecom backup batteries, off-grid power systems, marine battery banks, and high-capacity lithium battery installations.

Key Features

Designed for 24S lithium battery packs
Compatible with DALY Smart BMS (supported models)
Supports the safe parallel connection of multiple battery packs
15A controlled equalization current for rapid voltage balancing
Helps minimize voltage differences before parallel operation
Supports battery pack communication and synchronized management
Reduces surge current during battery pack connection
Improves battery bank expansion and system scalability
Plug-and-play installation with compatible DALY BMS
Durable industrial-grade construction for long-term reliability
Compatible with LiFePO₄ (LFP) and Lithium-Ion (NMC) battery systems
Designed for continuous operation in demanding energy storage environments

Applications

Parallel Lithium Battery Packs

Safely connects multiple 24S LiFePO₄ or Lithium-Ion battery packs to increase battery capacity and runtime.

Battery Energy Storage Systems (BESS)

Ideal for residential, commercial, and industrial solar energy storage systems.

Hybrid Solar Inverters

Supports expanded battery banks for hybrid inverter, off-grid, and renewable energy applications.

UPS & Backup Power Systems

Suitable for UPS battery banks, inverter systems, and emergency backup power solutions.

Telecom & Industrial Power Systems

Used in telecom backup batteries, industrial battery cabinets, and DC power distribution systems.

Marine & Mobile Energy Systems

Perfect for marine battery banks, RVs, camper vans, mobile power systems, and custom lithium battery installations.

The DALY 24S 15A Parallel Pack Module is a parallel communication and active balancing module for compatible DALY Smart BMS systems. It enables the safe parallel operation of multiple 24S lithium battery packs, provides 15A controlled equalization current for faster voltage balancing, and enhances the safety, reliability, and scalability of Battery Energy Storage Systems (BESS), solar energy storage, UPS systems, telecom power systems, EV battery banks, and industrial lithium battery applications.

41:Td54,

The TDT BMS Power Switch is a dedicated external power control accessory designed for TDT Smart Battery Management Systems (BMS). It allows users to remotely turn the BMS on or off without disconnecting the battery, providing a convenient and safe method for controlling battery pack operation during storage, transportation, maintenance, or daily use.

Designed for LiFePO₄ (LFP) and Lithium-Ion (NMC) battery systems, the power switch integrates directly with compatible TDT Smart BMS models, helping reduce standby power consumption, simplify battery management, and extend battery service life. It is ideal for electric vehicles (EVs), Battery Energy Storage Systems (BESS), solar energy storage, UPS systems, marine batteries, telecom power systems, and industrial lithium battery applications.

Key Features

Designed for TDT Smart BMS
External ON/OFF power control switch
Allows convenient remote switching of the BMS
Eliminates the need to disconnect the battery during shutdown
Helps reduce standby power consumption during storage
Supports safe battery maintenance and transportation
Plug-and-play connection with compatible TDT BMS models
Compact and durable design for long-term reliability
Easy installation with secure wiring connection
Compatible with LiFePO₄ (LFP) and Lithium-Ion (NMC) battery systems

Applications

Lithium Battery Packs

Provides convenient power control for LiFePO₄ and Lithium-Ion battery packs.

Electric Vehicles (EVs)

Ideal for electric scooters, motorcycles, e-rickshaws, golf carts, utility vehicles, and custom EV battery systems.

Battery Energy Storage Systems (BESS)

Suitable for residential ESS, commercial battery banks, solar energy storage systems, and off-grid power installations.

UPS & Backup Power Systems

Enables easy BMS power management for UPS batteries, inverter systems, and emergency backup power solutions.

Marine & RV Applications

Perfect for boats, yachts, camper vans, recreational vehicles, and mobile battery systems.

Industrial & Telecom Power Systems

Used in telecom battery cabinets, industrial battery packs, OEM battery assemblies, and DC power systems.

The TDT BMS Power Switch is an external ON/OFF control switch designed for compatible TDT Smart BMS systems. It provides a simple and reliable way to power the BMS on or off, reducing standby power consumption and improving battery management. It is an essential accessory for LiFePO₄ and Lithium-Ion battery packs used in EVs, Battery Energy Storage Systems (BESS), UPS installations, solar power systems, telecom equipment, and industrial lithium battery applications.

42:T6f1,

Key Features

Plug & Play Daly BMS Connector: Comes with a dedicated port to interface directly with Daly’s BMS (Battery Management System) without requiring manual configuration or custom wiring.

Real-Time Data Transmission: Sends live battery data such as voltage, current, temperature, and SOC (State of Charge) to cloud platforms or tracking systems.

Compact Design: Sleek and space-efficient housing allows for easy installation in limited space environments within EVs or battery enclosures.

Multi-wire Harness: Includes an extra wiring harness to facilitate power input and auxiliary data connections (IGN, ACC, GND, etc.).

IOT Enabled: Equipped with cellular or wireless communication module for seamless IoT connectivity.

Use Case Compatibility: Ideal for applications like:

Electric vehicles (2W/3W/4W)

E-rickshaws

Energy storage systems (ESS)

Fleet battery health monitoring

Typical Parameters (May vary by variant)

Parameter Specification

Communication Port UART (Dedicated to Daly)

Network GSM/GPRS/4G (varies)

Power Input 9V - 90V DC

Dimensions Compact (approx. 70x30x15mm)

Operating Temp -20°C to 60°C

Benefits

Battery Health Monitoring

Remote Diagnostics & Alerts

Improved Fleet Efficiency

Simplified Installation

43:T65a,

The JKBMS 24S 4AMP Accessories Adapter Board is a dedicated connection module designed for JK Smart BMS and Active Balancer systems. It simplifies the installation and integration of accessories such as LCD displays, RS485 communication modules, Bluetooth accessories, and active balancing systems.

This adapter board helps organize wiring connections and improves system stability by providing secure interfaces between the BMS and external accessories. It is widely used in LiFePO4, Li-ion, and LTO battery systems for applications such as solar energy storage, EV battery packs, UPS systems, and DIY lithium projects.

Key Features

Designed for JK Smart BMS & Active Balancer Systems
Compatible with 24S 4A Active Balancer setups
Simplifies BMS accessory connections
Stable communication interface for accessories
Supports LCD display & communication modules
Reduces wiring complexity
Compact PCB design for easy installation
Reliable and durable connector layout

Why Choose JK Adapter Board?

### Easy Wiring & Installation

Helps simplify complex BMS wiring layouts.

### Better Communication Stability

Provides secure and reliable accessory connections.

### Ideal for JK Ecosystem

Works seamlessly with JK Smart BMS accessories.

### Cleaner Battery Pack Design

Improves cable organization inside battery systems.

44:T65c,

The JKBMS 24S 10AMP Accessories Adapter Board is a dedicated connection module designed for JK Smart BMS and Active Balancer systems. It simplifies the installation and integration of accessories such as LCD displays, RS485 communication modules, Bluetooth accessories, and active balancing systems.

Key Features

Designed for JK Smart BMS & Active Balancer Systems
Compatible with 24S 10A Active Balancer setups
Simplifies BMS accessory connections
Stable communication interface for accessories
Supports LCD display & communication modules
Reduces wiring complexity
Compact PCB design for easy installation
Reliable and durable connector layout

Why Choose JK Adapter Board?

### Easy Wiring & Installation

Helps simplify complex BMS wiring layouts.

### Better Communication Stability

Provides secure and reliable accessory connections.

### Ideal for JK Ecosystem

Works seamlessly with JK Smart BMS accessories.

### Cleaner Battery Pack Design

Improves cable organization inside battery systems.

45:Te89,

The CAN Box for JK BMS is a CAN Bus communication module designed to enable seamless communication between JK Smart Battery Management Systems (BMS) and external devices such as hybrid inverters, Battery Energy Storage Systems (BESS), Energy Management Systems (EMS), PLCs, and monitoring platforms. It converts and transmits battery data through the CAN Bus protocol, allowing compatible equipment to receive accurate battery information for efficient system operation.

Designed for LiFePO₄ (LFP) and Li-ion (NMC) battery systems, the CAN Box enhances system integration by transmitting critical battery parameters such as State of Charge (SOC), battery voltage, current, temperature, battery status, and alarm information. It is an ideal solution for solar energy storage systems, UPS installations, off-grid power systems, commercial ESS, and industrial lithium battery applications.

Key Features

Designed for JK Smart BMS
Enables CAN Bus communication with compatible devices
Supports communication with hybrid inverters, PCS, EMS, PLCs, and monitoring systems
Real-time transmission of:
- State of Charge (SOC)
- Battery pack voltage
- Charge/discharge current
- Battery temperature
- Battery status
- Fault and alarm information
High-speed and reliable CAN Bus communication
Plug-and-play installation with compatible JK Smart BMS models
Compact and durable industrial-grade design
Improves compatibility with solar and energy storage equipment
Suitable for LiFePO₄ (LFP) and Li-ion (NMC) battery systems

Applications

Lithium Battery Packs

Provides reliable communication between JK Smart BMS and external monitoring devices.

Battery Energy Storage Systems (BESS)

Ideal for residential, commercial, and industrial energy storage systems.

Hybrid Solar Inverters

Enables battery communication with compatible hybrid inverters for optimized charging and discharging.

UPS & Backup Power Systems

Used in UPS systems, inverter battery banks, and backup power installations.

Industrial Energy Management

Suitable for EMS, PLC-based automation systems, industrial battery cabinets, and telecom power systems.

Off-Grid & Mobile Power Systems

Perfect for RVs, camper vans, marine battery systems, and off-grid solar installations.

The CAN Box for JK BMS is a CAN Bus communication interface that connects JK Smart BMS with compatible inverters, energy management systems, and monitoring devices. It enables real-time transmission of battery data, including State of Charge (SOC), voltage, current, temperature, battery status, and alarm information, improving system compatibility, monitoring, and overall performance in Battery Energy Storage Systems (BESS), solar installations, UPS systems, EV battery applications, and industrial power solutions.

46:Tea8,

The JK BMS-BLMK-5A Parallel Module is an intelligent battery pack parallel communication and current-limiting module designed for use with compatible JK Smart BMS models. It enables the safe parallel connection of multiple lithium battery packs by limiting equalization (inrush) current to approximately 5A during connection and supporting coordinated battery management between compatible BMS units. It is intended only for JK Smart BMS models equipped with a dedicated parallel communication interface.

Designed for LiFePO₄ (LFP) and Li-ion (NMC) battery systems, the JK-BLMK-5A is ideal for Battery Energy Storage Systems (BESS), solar energy storage, UPS systems, off-grid power systems, telecom batteries, and industrial lithium battery applications, helping improve the safety, reliability, and scalability of parallel battery installations.

Key Features

Model: JK-BLMK-5A
Designed for compatible JK Smart BMS with a dedicated parallel communication interface
Safely enables parallel connection of multiple battery packs
Limits equalization (inrush) current to approximately 5A
Helps protect battery packs, busbars, connectors, and wiring from surge currents
Supports synchronized communication between compatible parallel JK Smart BMS units
Improves battery bank expansion and system scalability
Plug-and-play installation with supported JK Smart BMS models
Compact and durable industrial-grade design
Compatible with LiFePO₄ (LFP) and Li-ion (NMC) battery systems
Suitable for residential, commercial, and industrial energy storage applications

Applications

Parallel Lithium Battery Packs

Safely connects multiple lithium battery packs in parallel while reducing equalization (inrush) current.

Battery Energy Storage Systems (BESS)

Ideal for residential, commercial, and industrial solar energy storage systems.

Hybrid Solar Inverters

Supports battery bank expansion for compatible inverter-based energy storage systems.

UPS & Backup Power Systems

Used in UPS installations, inverter battery banks, and backup power systems requiring parallel battery operation.

Industrial Energy Storage

Suitable for telecom power systems, industrial battery cabinets, large-capacity battery banks, and OEM energy storage solutions.

Off-Grid & Mobile Power Systems

Perfect for RVs, camper vans, marine battery systems, and off-grid solar power applications.

The JK BMS-BLMK-5A Parallel Module is a 5A current-limiting and parallel communication module that enables the safe expansion of compatible JK Smart BMS battery systems. By limiting equalization current during parallel connection and supporting coordinated battery management, it improves the safety, reliability, and scalability of lithium battery installations used in Battery Energy Storage Systems (BESS), solar power systems, UPS installations, EV applications, and industrial power solutions. It should only be used with JK Smart BMS models that specifically support the parallel module interface.

47:Tc6f,

The 16S Lithium-Ion Battery Pack PCBA is a high-performance Printed Circuit Board Assembly (PCBA) designed for 16-series (16S) lithium-ion battery packs. It serves as the core control board for battery management, integrating essential circuits for cell monitoring, voltage sensing, temperature detection, balancing support, and communication with a compatible Battery Management System (BMS).

Engineered for Lithium-Ion (NMC) battery packs, this PCBA is widely used in electric vehicles (EVs), Energy Storage Systems (ESS), UPS systems, power tools, telecom batteries, and industrial lithium battery applications, ensuring safe, reliable, and efficient battery operation.

Key Features

Designed for 16S (16-Series) Lithium-Ion battery packs
High-quality Printed Circuit Board Assembly (PCBA)
Supports cell voltage monitoring and battery management
Compatible with Battery Management System (BMS) integration
Supports cell balancing circuitry (depending on system configuration)
Interfaces for temperature sensor connections
High-precision voltage signal acquisition
Industrial-grade PCB with reliable electrical performance
Compact design for easy battery pack integration
Suitable for OEM battery pack manufacturing and custom battery assembly

Applications

Lithium-Ion Battery Packs

Designed for 16S NMC battery modules and custom battery pack assemblies.

Electric Vehicles (EVs)

Ideal for electric scooters, motorcycles, golf carts, utility vehicles, and light electric vehicles.

Energy Storage Systems (ESS)

Suitable for solar battery storage, residential ESS, commercial battery banks, and renewable energy systems.

UPS & Backup Power Systems

Used in UPS units, inverter battery systems, and emergency backup power solutions.

Industrial Battery Manufacturing

Perfect for OEM battery production, battery module assembly, and custom lithium battery pack integration.

Telecom & Power Systems

Suitable for telecom backup batteries, communication equipment, and industrial DC power systems.

The 16S Lithium-Ion Battery Pack PCBA is a battery management control board designed for 16-series lithium-ion battery packs. It provides accurate cell monitoring, supports BMS integration, and helps ensure safe, stable, and reliable battery operation in EVs, Energy Storage Systems (ESS), UPS installations, telecom equipment, industrial power applications, and custom battery pack manufacturing.

48:Td03,

The 24S 4A Balancer Connect Board is a high-performance interface module designed to connect a 24S 4A Active Balancer with 24-series lithium battery packs. It provides secure and organized connections between the battery cells and the active balancing system, ensuring accurate voltage sensing and efficient energy transfer during cell balancing.

Compatible with LiFePO₄ (LFP) and Lithium-Ion (NMC) battery chemistries, this connection board simplifies battery pack assembly, enhances wiring reliability, and supports stable operation of active balancing systems in Electric Vehicles (EVs), Battery Energy Storage Systems (BESS), solar ESS, UPS systems, and industrial battery applications.

Key Features

Designed for 24S (24-Series) lithium battery packs
Compatible with 4A Active Balancer modules
Supports LiFePO₄ (LFP) and Lithium-Ion (NMC) battery chemistries
Provides a secure and reliable cell connection interface
Ensures accurate cell voltage signal transmission
Simplifies battery pack wiring and installation
High-quality PCB with durable industrial-grade components
Compact design for easy integration into battery packs
Improves wiring organization and simplifies maintenance
Suitable for OEM battery manufacturing and custom battery pack assembly

Applications

Lithium Battery Packs

Provides a reliable connection interface for 24S LiFePO₄ and Lithium-Ion battery packs.

Electric Vehicles (EVs)

Suitable for electric motorcycles, scooters, utility vehicles, golf carts, and custom EV battery systems.

Battery Energy Storage Systems (BESS)

Ideal for solar energy storage systems, residential ESS, commercial battery banks, and off-grid power systems.

UPS & Backup Power Systems

Used in UPS battery banks, inverter systems, and emergency backup power installations.

Industrial Battery Manufacturing

Perfect for OEM battery assembly, battery module production, and custom lithium battery pack integration.

Telecom & Industrial Power Systems

Suitable for telecom backup batteries, industrial battery cabinets, and DC power systems.

The 24S 4A Balancer Connect Board is a connection interface module for 24S 4A Active Balancing Systems, providing secure cell connections and accurate voltage signal transmission for LiFePO₄ and Lithium-Ion battery packs. It helps improve battery balancing performance, simplifies battery pack assembly, and enhances the reliability of EV, Battery Energy Storage Systems (BESS), UPS, telecom, and industrial lithium battery applications.

49:Teac,

The UART Communication Box for JBD BMS is a communication interface module designed to establish a reliable wired connection between JBD (Jiabaida) Smart Battery Management Systems (BMS) and a computer, laptop, or compatible monitoring device. It enables users to monitor battery performance, configure BMS parameters, update firmware (where supported), and perform diagnostics using JBD-compatible software.

Designed for LiFePO₄ (LFP) and Lithium-Ion (NMC) battery systems, the UART Communication Box provides stable data transmission for monitoring key battery parameters such as State of Charge (SOC), battery voltage, current, individual cell voltages, temperature, charging/discharging status, and fault information. It is widely used in battery manufacturing, EV applications, Battery Energy Storage Systems (BESS), UPS systems, and industrial lithium battery installations.

Key Features

Designed for JBD (Jiabaida) Smart BMS
UART communication interface for reliable wired data transfer
Enables battery monitoring, parameter configuration, and diagnostics
Compatible with JBD PC software for BMS management
Supports real-time monitoring of:
- State of Charge (SOC)
- Battery pack voltage
- Charge/discharge current
- Individual cell voltages
- Battery temperature
- MOSFET status
- Fault and alarm information
Supports firmware updates on compatible BMS models
Plug-and-play design for quick connection
Compact and durable enclosure for professional use
Compatible with LiFePO₄ (LFP) and Lithium-Ion (NMC) battery systems

Applications

Lithium Battery Packs

Used for monitoring, configuring, and diagnosing LiFePO₄ and Lithium-Ion battery packs.

Electric Vehicles (EVs)

Ideal for electric scooters, motorcycles, e-rickshaws, golf carts, and utility vehicles.

Battery Energy Storage Systems (BESS)

Suitable for solar energy storage systems, residential ESS, commercial battery banks, and off-grid installations.

UPS & Backup Power Systems

Provides BMS configuration and monitoring for UPS batteries and inverter battery systems.

Battery Manufacturing & Service Centers

Perfect for OEM battery pack assembly, production testing, maintenance, and after-sales service.

Research & Development

Useful for battery testing, prototyping, laboratory applications, and custom lithium battery development.

The UART Communication Box for JBD BMS is a wired communication and configuration interface that connects compatible JBD Smart BMS units to a computer for real-time battery monitoring, parameter configuration, diagnostics, and firmware updates. It is an essential accessory for managing lithium battery systems in EVs, Battery Energy Storage Systems (BESS), UPS installations, battery manufacturing, and industrial power applications.

4a:Tee3,

The USB to RS485 Converter for DALY BMS K-Type is a professional communication interface designed to connect DALY K-Type Smart Battery Management Systems (BMS) to a Windows PC or laptop via a USB port. It enables reliable RS485 communication for battery monitoring, parameter configuration, diagnostics, firmware management (where supported), and data logging using compatible DALY BMS software.

Designed for LiFePO₄ (LFP), Lithium-Ion (NMC), and LTO battery systems, this converter provides stable and high-speed communication, making it an essential tool for battery manufacturers, EV service centers, energy storage system integrators, and industrial battery maintenance professionals.

Key Features

Designed for DALY K-Type Smart BMS
Converts USB to RS485 communication
Enables BMS monitoring, configuration, and diagnostics
Compatible with DALY PC monitoring software
Supports real-time monitoring of:
- State of Charge (SOC)
- Battery pack voltage
- Charge/discharge current
- Individual cell voltages
- Battery temperature
- MOSFET status
- Battery health and fault alarms
Supports parameter configuration and firmware updates (on compatible BMS models)
High-speed and stable RS485 data transmission
Plug-and-play USB interface for easy installation
Durable industrial-grade construction
Compatible with LiFePO₄ (LFP), Lithium-Ion (NMC), and LTO battery systems

Applications

Lithium Battery Packs

Used for monitoring, configuring, and diagnosing LiFePO₄, Lithium-Ion, and LTO battery packs.

Electric Vehicles (EVs)

Ideal for electric scooters, motorcycles, e-rickshaws, golf carts, electric cars, and commercial EV battery systems.

Battery Energy Storage Systems (BESS)

Suitable for solar energy storage systems, residential ESS, commercial battery banks, and off-grid installations.

UPS & Backup Power Systems

Provides BMS communication for UPS batteries, inverter battery systems, and emergency backup power solutions.

Battery Manufacturing & Service Centers

Perfect for OEM battery pack assembly, quality control, production testing, maintenance, and after-sales service.

Industrial & Telecom Power Systems

Used in telecom battery cabinets, industrial DC power systems, and energy management applications.

The USB to RS485 Converter for DALY BMS K-Type is a professional communication and configuration tool that connects DALY K-Type Smart BMS to a computer for real-time battery monitoring, parameter configuration, diagnostics, firmware management (where supported), and data logging. It is an essential accessory for managing lithium battery systems in EVs, Battery Energy Storage Systems (BESS), UPS installations, telecom power systems, and industrial battery applications.

27:[["$","script",null,{"type":"application/ld+json","dangerouslySetInnerHTML":{"__html":"{\"@context\":\"https://schema.org\",\"@type\":\"BreadcrumbList\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https://arbaccessories.in\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Categories\",\"item\":\"https://arbaccessories.in/categories\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"BMS Accessories\"}]}"}}],["$","$L35",null,{"category":"bms/bms-accessories","initialData":{"item_group":{"name":"BMS Accessories","item_group_name":"BMS Accessories","image":"https://s3.ap-south-1.amazonaws.com/arbaccessorieserp/arbaccessorieserp/2026/07/12/Item Group/YF4DZU80_PARALLER_PACK_MODULE_5A_DALY_.jpg","description":"","parent_item_group":"BMS","header_images":[],"filters":{"Colour":{"attribute_name":"Colour","numeric_values":0,"values":[{"attribute_value":"Red","abbr":"RED"},{"attribute_value":"Green","abbr":"GRE"},{"attribute_value":"Blue","abbr":"BLU"},{"attribute_value":"Black","abbr":"BLA"},{"attribute_value":"White","abbr":"WHI"}]},"Size":{"attribute_name":"Size","numeric_values":0,"values":[{"attribute_value":"Extra Small","abbr":"XS"},{"attribute_value":"Small","abbr":"S"},{"attribute_value":"Medium","abbr":"M"},{"attribute_value":"Large","abbr":"L"},{"attribute_value":"Extra Large","abbr":"XL"}]}}},"products":[{"item_code":"26000584","website_item_name":"WEB-ITM-0580","name":"2G GPS DEVICE FOR HARDWARE BMS","title":"2G GPS DEVICE FOR HARDWARE BMS","route":"2g-gps-device-for-hardware-bms-web-itm-0580","image":"https://s3.ap-south-1.amazonaws.com/arbaccessorieserp/arbaccessorieserp/2026/07/13/Website Item/QXQ73SZU_2G_IOT_DEVICE.jpg","product_image":null,"item_group":"BMS Accessories","brand":null,"brand_route":"","price":1990,"uom":"PCS","description":"

This is a compact, wired GPS tracking device used in vehicle tracking and IoT monitoring systems, commonly employed for fleet management, asset tracking, and security purposes.

Wiring Color Code (Typical)

Red: Power (+12V/+24V)

Black: Ground

Yellow: Ignition (ACC)

Orange/Brown: Optional outputs (e.g., fuel relay, siren)

White/Green: Optional inputs (e.g., door sensor)

(Note: Actual wiring may vary slightly depending on manufacturer. Please refer to the included manual for installation.)

Common Applications

Vehicle tracking for personal or fleet use

School bus and taxi route monitoring

Logistics and delivery vehicle dispatch

Anti-theft vehicle immobilization

Equipment/machinery monitoring in agriculture or construction

The JBD Metal Buzzer 12V with Light is a robust alerting device used in battery management systems (BMS) and other industrial applications to signal warnings or system notifications. It operates on a 12V DC power supply and combines a high-decibel buzzer with a bright indicator light for enhanced visibility and auditory alerts. The durable metal casing ensures long-lasting performance and resistance to environmental factors. This dual-alert feature effectively communicates battery faults, over-temperature warnings, or other critical alerts. Its compact design and straightforward installation make it suitable for electric vehicles, energy storage systems, and other industrial monitoring solutions.

","moq":5,"backorder_enabled":0,"has_variants":0,"flags":"","stock_status":"In Stock","to_be_manufactured":0,"is_manufactured":false,"is_disabled_for_air":0,"custom_manual_ranking":0,"ranking":0,"gst_rate":18},{"item_code":"26000595","website_item_name":"WEB-ITM-0591","name":"JBD BLUETOOTH","title":"JBD BLUETOOTH","route":"jbd-bluetooth-web-itm-0591","image":"https://s3.ap-south-1.amazonaws.com/arbaccessorieserp/arbaccessorieserp/2026/07/13/Website Item/KN2JPMN9_BMS_ACCESSORIES_-BT_JBD_b159_1.jpg","product_image":null,"item_group":"BMS Accessories","brand":"JBD","brand_route":"brands/jbd","price":311,"uom":"PCS","description":"$38","moq":3,"backorder_enabled":0,"has_variants":0,"flags":"","stock_status":"In Stock","to_be_manufactured":0,"is_manufactured":false,"is_disabled_for_air":0,"custom_manual_ranking":0,"ranking":0,"gst_rate":18},{"item_code":"26000596","website_item_name":"WEB-ITM-0592","name":"JBD USB TO UART TOOLS","title":"JBD USB TO UART TOOLS","route":"jbd-usb-to-uart-tools-web-itm-0592","image":"https://s3.ap-south-1.amazonaws.com/arbaccessorieserp/arbaccessorieserp/2026/07/13/Website Item/EJSBHDA9_USB_TO_UART_TOOL_JBD.jpg","product_image":null,"item_group":"BMS Accessories","brand":"JBD","brand_route":"brands/jbd","price":512,"uom":"PCS","description":"

USB to UART tools for JBD modules are essential devices that enable seamless communication between a computer and a battery management system (BMS). They convert USB signals to UART protocol, facilitating data exchange for configuration, diagnostics, and real-time monitoring. These tools support parameter adjustments, battery status updates, fault detection, and firmware updates, enhancing battery system performance and safety. With wide compatibility across operating systems, USB to UART tools are user-friendly and versatile, making them indispensable for engineers and technicians managing lithium battery systems in electric vehicles, energy storage solutions, and other applications requiring precise battery control and management.

UART to CAN tools for JBD modules enable seamless conversion between UART (Universal Asynchronous Receiver-Transmitter) and CAN (Controller Area Network) protocols, facilitating efficient communication in battery management systems (BMS). These tools allow real-time data monitoring, diagnostics, and parameter configuration for battery systems by bridging devices that use different communication protocols. They support precise transmission of key battery metrics such as voltage, current, and temperature while ensuring robust and reliable data exchange in automotive and industrial environments. With compatibility for various applications, these tools are essential for integrating legacy systems with modern CAN-based networks for advanced battery management solutions.

The CAN (Controller Area Network) JBD (Joint Battery Data) module is a critical component in battery management systems, particularly in electric vehicles and energy storage systems. It facilitates reliable communication between the battery management system and other control units via the CAN bus protocol. This module monitors and reports key battery metrics, including voltage, current, temperature, and state of charge, ensuring optimal performance and safety. It enables efficient diagnostics, real-time data logging, and fault detection to protect the battery pack from damage. The JBD module supports seamless integration with various industrial and automotive applications for advanced energy management solutions.

The Silicone Wire with Thimble Blue 40A/60A (Daly) is a high-performance, flexible wire designed for use in high-current applications such as battery management systems (BMS), electric vehicles (EVs), and energy storage solutions. Rated for 40A or 60A, it features durable silicone insulation that provides excellent heat resistance, flexibility, and protection against moisture, chemicals, and environmental stress. The thimble-end connectors ensure secure, reliable connections for efficient power transfer. Its blue color differentiates it for specific applications, while the wire's robust design ensures safe, long-lasting performance in demanding, high-power environments. Ideal for use in power distribution and automotive systems.

","moq":20,"backorder_enabled":0,"has_variants":0,"flags":"","stock_status":"In Stock","to_be_manufactured":0,"is_manufactured":false,"is_disabled_for_air":0,"custom_manual_ranking":0,"ranking":0,"gst_rate":18},{"item_code":"26000609","website_item_name":"WEB-ITM-0605","name":"DALY SILICONE WIRE WITH THIMBLE 100A BLUE","title":"DALY SILICONE WIRE WITH THIMBLE 100A BLUE","route":"daly-silicone-wire-with-thimble-100a-blue-web-itm-0605","image":"https://s3.ap-south-1.amazonaws.com/arbaccessorieserp/arbaccessorieserp/2026/07/13/Website Item/NC4RZRBI_SILICONE_WIRE_WITH_THIMBLE_BLUE_100A_.webp","product_image":null,"item_group":"BMS Accessories","brand":"Daly","brand_route":"brands/daly","price":55,"uom":"PCS","description":"

The Silicone Wire with Thimble Blue 100A (Daly) is a high-performance, flexible wire designed for high-current applications, such as in battery management systems (BMS) and electric vehicle (EV) setups. Rated for 100A, this wire features durable silicone insulation, which offers superior heat resistance, flexibility, and protection against moisture, chemicals, and abrasion. The thimble-end connectors provide a secure and reliable connection, ensuring efficient power delivery. The blue color distinguishes this wire for specific applications, while its construction ensures long-lasting, safe performance in demanding environments. Ideal for use in power distribution, energy storage, and automotive systems.

","moq":20,"backorder_enabled":0,"has_variants":0,"flags":"","stock_status":"In Stock","to_be_manufactured":0,"is_manufactured":false,"is_disabled_for_air":0,"custom_manual_ranking":0,"ranking":0,"gst_rate":18},{"item_code":"26000610","website_item_name":"WEB-ITM-0606","name":"DALY SILICONE WIRE WITH THIMBLE 100A BLACK","title":"DALY SILICONE WIRE WITH THIMBLE 100A BLACK","route":"daly-silicone-wire-with-thimble-100a-black-web-itm-0606","image":"https://s3.ap-south-1.amazonaws.com/arbaccessorieserp/arbaccessorieserp/2026/07/13/Website Item/CWA38USN_SILICONE_WIRE_WITH_THIMBLE_BLACK_100A_.webp","product_image":null,"item_group":"BMS Accessories","brand":"Daly","brand_route":"brands/daly","price":55,"uom":"PCS","description":"

The Silicone Wire with Thimble Black 100A (Daly) is a high-quality, flexible wire designed for high-current applications, typically used in battery management systems (BMS) and electric vehicle (EV) systems. Rated for 100A current, this wire is coated with durable silicone insulation, offering excellent heat resistance, flexibility, and resistance to environmental factors such as moisture and chemicals. The thimble-end connectors ensure secure and reliable connections, making it ideal for high-power connections within BMS, energy storage, and automotive systems. Its black color and robust construction make it suitable for demanding applications that require safe and efficient power delivery.

","moq":20,"backorder_enabled":0,"has_variants":0,"flags":"","stock_status":"In Stock","to_be_manufactured":0,"is_manufactured":false,"is_disabled_for_air":0,"custom_manual_ranking":0,"ranking":0,"gst_rate":18},{"item_code":"26000611","website_item_name":"WEB-ITM-0607","name":"DALY BLUETOOTH","title":"DALY BLUETOOTH","route":"daly-bluetooth-web-itm-0607","image":"https://s3.ap-south-1.amazonaws.com/arbaccessorieserp/arbaccessorieserp/2026/07/13/Website Item/JOMHISTO_BMS_ACCESSORIES_-BT.webp","product_image":null,"item_group":"BMS Accessories","brand":"Daly","brand_route":"brands/daly","price":322,"uom":"PCS","description":"

The BMS Bluetooth Accessory (Daly) is a wireless communication module designed to connect Daly Battery Management Systems (BMS) to smartphones, tablets, or computers via Bluetooth. It enables real-time monitoring of battery parameters such as voltage, current, temperature, and state of charge without the need for physical connections. Users can access and manage system data, receive alerts, and configure settings through a dedicated mobile app or software interface. This accessory enhances the user experience by providing remote access to the BMS, making it ideal for applications in electric vehicles, energy storage systems, and renewable energy solutions.

The CAN Module Daly is a communication interface designed to integrate Daly Battery Management Systems (BMS) with external control units via the Controller Area Network (CAN) protocol. It facilitates real-time data exchange, including battery voltage, current, temperature, and state-of-charge information, ensuring efficient system monitoring and control. This module supports high-speed communication for precise diagnostics, fault detection, and system optimization in applications such as electric vehicles, energy storage systems, and industrial automation. Its compact design and robust compatibility make it ideal for enhancing the functionality and connectivity of Daly BMS units in various environments.

NEEY BALANCER CONNECT BOARD 24S 10AMP

","moq":1,"backorder_enabled":0,"has_variants":0,"flags":"","stock_status":"In Stock","to_be_manufactured":0,"is_manufactured":false,"is_disabled_for_air":0,"custom_manual_ranking":0,"ranking":0,"gst_rate":18},{"item_code":"26000585","website_item_name":"WEB-ITM-0581","name":"PS11 IOT DEVICE FOR DALY SMART BMS","title":"PS11 IOT DEVICE FOR DALY SMART BMS","route":"ps11-iot-device-for-daly-smart-bms-web-itm-0581","image":"https://s3.ap-south-1.amazonaws.com/arbaccessorieserp/arbaccessorieserp/2026/07/13/Website Item/KEU89GJN_PS11_IOT_DEVICE_DALY.jpg","product_image":null,"item_group":"BMS Accessories","brand":null,"brand_route":"","price":3895,"uom":"PCS","description":"$42","moq":1,"backorder_enabled":0,"has_variants":0,"flags":"","stock_status":"Out of Stock","to_be_manufactured":0,"is_manufactured":false,"is_disabled_for_air":0,"custom_manual_ranking":0,"ranking":0,"gst_rate":18},{"item_code":"26000587","website_item_name":"WEB-ITM-0583","name":"JK BALANCER CONNECT BOARD 24S 4AMP","title":"JK BALANCER CONNECT BOARD 24S 4AMP","route":"jk-balancer-connect-board-24s-4amp-web-itm-0583","image":"https://s3.ap-south-1.amazonaws.com/arbaccessorieserp/arbaccessorieserp/2026/07/13/Website Item/XO1Z4IZW_1.jpg","product_image":null,"item_group":"BMS Accessories","brand":"JKBMS","brand_route":"brands/jkbms","price":403,"uom":"PCS","description":"$43","moq":1,"backorder_enabled":0,"has_variants":0,"flags":"","stock_status":"Out of Stock","to_be_manufactured":0,"is_manufactured":false,"is_disabled_for_air":0,"custom_manual_ranking":0,"ranking":0,"gst_rate":18},{"item_code":"26000588","website_item_name":"WEB-ITM-0584","name":"JK BALANCER CONNECT BOARD 24S 10AMP","title":"JK BALANCER CONNECT BOARD 24S 10AMP","route":"jk-balancer-connect-board-24s-10amp-web-itm-0584","image":"https://s3.ap-south-1.amazonaws.com/arbaccessorieserp/arbaccessorieserp/2026/07/13/Website Item/7M9OVYDO_1.jpg","product_image":null,"item_group":"BMS Accessories","brand":"JKBMS","brand_route":"brands/jkbms","price":675,"uom":"PCS","description":"$44","moq":1,"backorder_enabled":0,"has_variants":0,"flags":"","stock_status":"Out of Stock","to_be_manufactured":0,"is_manufactured":false,"is_disabled_for_air":0,"custom_manual_ranking":0,"ranking":0,"gst_rate":18},{"item_code":"26000589","website_item_name":"WEB-ITM-0585","name":"JK CAN BOX","title":"JK CAN BOX","route":"jk-can-box-web-itm-0585","image":"https://s3.ap-south-1.amazonaws.com/arbaccessorieserp/arbaccessorieserp/2026/07/13/Website Item/IKUMNWB8_CAN_BOX_JK__1.jpg","product_image":null,"item_group":"BMS Accessories","brand":"JKBMS","brand_route":"brands/jkbms","price":9306,"uom":"PCS","description":"$45","moq":1,"backorder_enabled":0,"has_variants":0,"flags":"","stock_status":"Out of Stock","to_be_manufactured":0,"is_manufactured":false,"is_disabled_for_air":0,"custom_manual_ranking":0,"ranking":0,"gst_rate":18},{"item_code":"26000590","website_item_name":"WEB-ITM-0586","name":"JK PARALLEL MOUDEL BMS-BLMK-5A","title":"JK PARALLEL MOUDEL BMS-BLMK-5A","route":"jk-parallel-moudel-bms-blmk-5a-web-itm-0586","image":"https://s3.ap-south-1.amazonaws.com/arbaccessorieserp/arbaccessorieserp/2026/07/29/Website Item/PH8YCS70_JK_PARALLEL_MOUDEL_BMS-BLMK-5A.jpg","product_image":null,"item_group":"BMS Accessories","brand":"JKBMS","brand_route":"brands/jkbms","price":966,"uom":"PCS","description":"$46","moq":1,"backorder_enabled":0,"has_variants":0,"flags":"","stock_status":"Out of Stock","to_be_manufactured":0,"is_manufactured":false,"is_disabled_for_air":0,"custom_manual_ranking":0,"ranking":0,"gst_rate":18},{"item_code":"26000591","website_item_name":"WEB-ITM-0587","name":"JK PCBA FOR LITHIUM ION 16S BATTERY PACK","title":"JK PCBA FOR LITHIUM ION 16S BATTERY PACK","route":"jk-pcba-for-lithium-ion-16s-battery-pack-web-itm-0587","image":"https://s3.ap-south-1.amazonaws.com/arbaccessorieserp/arbaccessorieserp/2026/07/29/Website Item/7CH96J45_JK_PCBA_FOR_LITHIUM_ION_16S_BATTERY_PACKJK_PCBA_FOR_LITHIUM_ION_16S_BATTERY_PACK.jpg","product_image":null,"item_group":"BMS Accessories","brand":"JKBMS","brand_route":"brands/jkbms","price":1053,"uom":"PCS","description":"$47","moq":1,"backorder_enabled":0,"has_variants":0,"flags":"","stock_status":"Out of Stock","to_be_manufactured":0,"is_manufactured":false,"is_disabled_for_air":0,"custom_manual_ranking":0,"ranking":0,"gst_rate":18},{"item_code":"26000592","website_item_name":"WEB-ITM-0588","name":"NEEY BALANCER CONNECT BOARD 24S 4AMP","title":"NEEY BALANCER CONNECT BOARD 24S 4AMP","route":"neey-balancer-connect-board-24s-4amp-web-itm-0588","image":"https://s3.ap-south-1.amazonaws.com/arbaccessorieserp/arbaccessorieserp/2026/07/13/Website Item/M13QIEPO_1_1.jpg","product_image":null,"item_group":"BMS Accessories","brand":"NEEY","brand_route":"brands/neey","price":434,"uom":"PCS","description":"$48","moq":1,"backorder_enabled":0,"has_variants":0,"flags":"","stock_status":"Out of Stock","to_be_manufactured":0,"is_manufactured":false,"is_disabled_for_air":0,"custom_manual_ranking":0,"ranking":0,"gst_rate":18},{"item_code":"26000597","website_item_name":"WEB-ITM-0593","name":"JBD USB TO SMALL SOC UART CABEL","title":"JBD USB TO SMALL SOC UART CABEL","route":"jbd-usb-to-small-soc-uart-cabel-web-itm-0593","image":"https://s3.ap-south-1.amazonaws.com/arbaccessorieserp/arbaccessorieserp/2026/07/27/Website Item/OVIQCYY6_USB_TO_RS485_TOOL_JBD.png","product_image":null,"item_group":"BMS Accessories","brand":"","brand_route":"","price":525,"uom":"PCS","description":"

USB TO RS485 JBD CABLE for JBD modules provide a reliable communication bridge between computers and battery management systems (BMS) using the RS485 protocol. These tools enable real-time monitoring, diagnostics, and configuration of battery parameters, including voltage, current, and temperature. They support long-distance, noise-resistant communication in industrial environments, ensuring stable data transmission even in harsh conditions. USB to RS485 tools are widely used for firmware updates, fault detection, and system optimization, offering compatibility with various operating systems and software applications. Their versatility makes them essential for managing lithium battery systems in energy storage, electric vehicles, and industrial automation solutions.

","moq":1,"backorder_enabled":0,"has_variants":0,"flags":"","stock_status":"Out of Stock","to_be_manufactured":0,"is_manufactured":false,"is_disabled_for_air":0,"custom_manual_ranking":0,"ranking":0,"gst_rate":18},{"item_code":"26000598","website_item_name":"WEB-ITM-0594","name":"JBD UART COMMUNICATION BOX","title":"JBD UART COMMUNICATION BOX","route":"jbd-uart-communication-box-web-itm-0594","image":"https://s3.ap-south-1.amazonaws.com/arbaccessorieserp/arbaccessorieserp/2026/07/13/Website Item/19GOEXG4_CAN_MODULE_JBD.jpg","product_image":null,"item_group":"BMS Accessories","brand":"JBD","brand_route":"brands/jbd","price":550,"uom":"PCS","description":"$49","moq":1,"backorder_enabled":0,"has_variants":0,"flags":"","stock_status":"Out of Stock","to_be_manufactured":0,"is_manufactured":false,"is_disabled_for_air":0,"custom_manual_ranking":0,"ranking":0,"gst_rate":18},{"item_code":"26000604","website_item_name":"WEB-ITM-0600","name":"DALY USB TO RS485 K TYPE","title":"DALY USB TO RS485 K TYPE","route":"daly-usb-to-rs485-k-type-web-itm-0600","image":"https://s3.ap-south-1.amazonaws.com/arbaccessorieserp/arbaccessorieserp/2026/07/13/Website Item/34D52ILD_BMS_ACCESSORIES_BLUETOOTH_DALY.jpg","product_image":null,"item_group":"BMS Accessories","brand":"Daly","brand_route":"brands/daly","price":337,"uom":"PCS","description":"$4a","moq":1,"backorder_enabled":0,"has_variants":0,"flags":"","stock_status":"Out of Stock","to_be_manufactured":0,"is_manufactured":false,"is_disabled_for_air":0,"custom_manual_ranking":0,"ranking":0,"gst_rate":18},{"item_code":"26000606","website_item_name":"WEB-ITM-0602","name":"DALY USB CAN CABLE","title":"DALY USB CAN CABLE","route":"daly-usb-can-cable-web-itm-0602","image":"https://s3.ap-south-1.amazonaws.com/arbaccessorieserp/arbaccessorieserp/2026/07/13/Website Item/9WUZ43F3_CAN_MODULE_DALY_1.webp","product_image":null,"item_group":"BMS Accessories","brand":"Daly","brand_route":"brands/daly","price":25,"uom":"PCS","description":"

The BMS CAN Wire for Smart BMS (Daly) is a specialized communication cable used to connect Daly Smart Battery Management Systems (BMS) to external controllers or monitoring devices via the CAN bus protocol. This wire enables real-time data exchange, including battery status, voltage, current, temperature, and state of charge. It ensures efficient communication between the BMS and other system components, facilitating system monitoring, diagnostics, and configuration. Ideal for applications such as electric vehicles, energy storage, and industrial setups, the cable is durable, easy to install, and ensures reliable data transmission, contributing to the overall performance and safety of battery systems.

The Silicone Wire with Thimble Black 40A/60A (Daly) is a flexible and durable wire designed for high-current applications in battery management systems (BMS), electric vehicles (EVs), and energy storage systems. Available in 40A and 60A ratings, this wire features high-quality silicone insulation, offering excellent heat resistance, flexibility, and protection against moisture, chemicals, and wear. The thimble-end connectors ensure a secure and reliable connection, making it ideal for use in power distribution and high-performance systems. Its black color provides a professional, durable finish, and the wire is designed to perform safely in demanding environments.

","moq":20,"backorder_enabled":0,"has_variants":0,"flags":"","stock_status":"Out of Stock","to_be_manufactured":0,"is_manufactured":false,"is_disabled_for_air":0,"custom_manual_ranking":0,"ranking":0,"gst_rate":18},{"item_code":"26000612","website_item_name":"WEB-ITM-0608","name":"DALY USB TO RS485 CONNECTOR CABLE","title":"DALY USB TO RS485 CONNECTOR CABLE","route":"daly-usb-to-rs485-connector-cable-web-itm-0608","image":"https://s3.ap-south-1.amazonaws.com/arbaccessorieserp/arbaccessorieserp/2026/07/13/Website Item/Z3ITW0MW_USB_TO_RS485_CONNECTOR_CABLE_DALY.jpg","product_image":null,"item_group":"BMS Accessories","brand":"Daly","brand_route":"brands/daly","price":321,"uom":"PCS","description":"

The USB to RS485 Connector Cable (Daly) is a communication tool that bridges the connection between a Daly Battery Management System (BMS) and a computer. It allows users to configure, monitor, and troubleshoot battery systems via the RS485 protocol, offering reliable and long-distance data transmission. The cable features a USB interface for easy connection to a computer, with an RS485 connector for communication with the BMS. It is essential for real-time data monitoring, firmware updates, and diagnostics in applications such as electric vehicles, energy storage, and renewable energy systems. The cable is durable, flexible, and designed for seamless integration with Daly BMS.

The USB-to-UART Connector Cable is a crucial tool for enabling communication between a USB-enabled device, such as a computer, and a UART-based system. This cable features a USB interface on one end and a UART connector (typically 4 or 6 pins: TX, RX, GND, VCC) on the other, allowing seamless data transfer for configuration, monitoring, and debugging tasks. It supports standard baud rates (such as 9600 and 115200) for serial communication and is commonly used in embedded systems, microcontroller programming, and battery management system (BMS) setups. The cable is durable, easy to use, and compatible with various UART devices and applications.

The Parallel Interface Board (Daly) is a specialized component designed to efficiently connect and manage multiple battery packs in parallel configurations. It ensures synchronized communication between individual battery management systems (BMS), facilitating balanced charging and discharging across packs. The board supports seamless current distribution, fault detection, and voltage equalization, helping maintain optimal battery health and system performance. Ideal for scalable energy storage systems, electric vehicles, and renewable energy applications, the board provides reliable operation with built-in protections to prevent overvoltage, overcurrent, and imbalances, ensuring safe and efficient parallel battery operation.

Bms Accessories products