Aluminium Screw Rivet 3/16" 100PCS

Aluminium Screw Rivet 3/16" 100pcs

The Aluminium Screw Rivet 3/16"" 100pcs is an aluminium screw-rivet fastener supplied in a 100-piece pack for compatible mechanical assembly work. Its nominal 3/16 inch designation is about 4.76 mm and should be matched to the prepared hole, panel stack and actual fastener geometry.

This 3/16 aluminium screw rivet is mechanical assembly hardware rather than a battery current-carrying component. External battery-accessory sellers list the same nominal size for battery and electronics assembly markets, while the supplied product name confirms aluminium construction and a 100-piece pack. It is relevant to battery enclosures, covers, brackets and serviceable hardware where the joint has been designed for this fastener style. Head shape, thread arrangement and grip range must be checked on the real part.

Fastener selection depends on nominal diameter, hole size, panel thickness and joint loading. Aluminium keeps mass low, but strength, thread durability and corrosion behaviour depend on the exact alloy and surface treatment, which are not provided in the item name. When aluminium is assembled against dissimilar metals, the designer should consider galvanic compatibility and any required washers, coatings or isolation. The rivet should not be treated as an intentional current path unless the complete joint has been engineered for that purpose.

Confirm the required nominal size is 3/16 inch and compare the actual rivet body, head, thread and engagement length with the hole and material stack. Check tool access and clamp requirements. In battery enclosures, maintain safe clearance from cells, busbars, PCBs and live conductors so the fastener cannot damage insulation or touch energized hardware. Do not substitute it for a structural rivet, threaded insert or electrical terminal unless the drawing allows it.

Applications

• Battery-box and enclosure assembly

• Battery-pack mechanical fastening and refurbishment

• Electrical panel and electronics enclosure assembly

• Workshop fixtures, brackets and light hardware mounting

• Maintenance work where a 3/16-inch fastener size is required

Installation Guide

Isolate the equipment before fitting the fastener. Verify the prepared hole and panel stack, place the screw rivet square to the surface and tighten only with the method appropriate to the actual design. Avoid excessive clamp load on thin sheet or plastic. Confirm the installed head does not interfere with cables or insulation. For repeat production, standardize hole preparation and inspect representative joints for security and panel damage.

Why Choose ARB Accessories?

ARB Accessories supplies battery-pack assembly hardware along with cable terminals, BMS products, connectors, busbars, tapes and insulation materials for Indian pack builders and service operations. Sourcing related accessories together can simplify enclosure assembly and maintenance planning. Verify the exact rivet geometry before bulk use.